Home comapny quality products conatcts
   Products >> Copper welding materials
 



ERCuMnNiAl

ERCuNiAl

SG-CuAl8Ni2

ERCuAl-A3

ERCuSn-A

ERCuNi

ERCuSi-A

ERCuAl-A1


 
Tungsten & molybdenum
ERCuSn-A
Standardization :
AWS:A5.7: ERCuSn-A DIN1733:SG-CuSn6
BS2901P.3:C11
UNS:C51800
Material No: 2.1022
Applications=> Suitable for welding of copper materials for example copper and tin bronzes, especially used for joining of copper zinc alloys and steels. Suitable for repair welding of cast bronzes. For large work pieces preheating is recommended. For multiplayer welding on steel, pulsed arc welding is recommended-also appropriate for oven soldering.
Composition(standard value)%
Cu
Al
Si
Sn
Pb
Zn
P
Fe
Other
Balance
0.01
0.1
5.0-8.0
0.02
0.1
0.01-0.35
0.1
0.40
Physical properties =>
  Electrical conductivity 9 S·m/mm2
Density        8.7kg/dm3
Solidus-Temperature 910℃
Liguidus-Temperature 1040℃
Tensile strength    320-360N/mm2
Elongation(Lo=5do)  25%
Hardness        80-90 HB
Welding position => PA,PB,PC,PE,PF
Shielding gas=> I1,I2,I3 (Argon,Helium or Argon/Helium mixtures)
Polarity=> MIG = +,WIG ~
Dimensions ∮=>  
Packaging MIG win =>
Packaging TIG rods =>
Carton 5㎏/10lbs
Length 1000mm/36〞
-Other diameter and packaging available upon special request. Mechanical properties quoted above are approximate values intended for guidance only.
ZhenJiang LanFeng Non-ferrous Co.,Ltd 2007-2008 All Rights Reserved 

Address ZhongShan Road,Zhenjiang,JiangSu,China. Phone:86-511-85878184